XGSPON ONU Stick SFP+ with MAC Optical Transceiver,Version 8311,Compatible Mikro-TIK Netgate TP Link 10G Switches and Routers SMF 9.953G-TX/9.953G-RX,1270 nm-TX/1577 nm-RX

8311 Firmware Version (Supports Web management), For the 8311 Firmware Version, we pre-flash the device with firmware version 2.8.0 by default, and each unit is thoroughly tested before shipment to ensure proper functionality. Flashing Advisory: We strongly recommend that buyers avoid flashing the device unless absolutely necessary. Incorrect firmware flashing can result in functionality issues that may not be covered under our warranty. For those intending to flash the device, we highly advise creating a backup of the u-Boot before proceeding with any firmware updates to minimize potential risks.

• XGSPON ONU SFP+ Stick is a high-performance plug-and-play module designed to replace traditional SFU ONTs. Pre-installed 8311 Community Firmware V2.8.0, easy for use.
• Compliant with ITU-T standards, it leverages the MaxLinear PRX126 chipset to deliver 9.953Gbps symmetrical speeds (1270nm TX/1577nm RX) over 20km via single-mode fiber.
• Featuring SC/APC connectors and built-in DDM for real-time temperature/power monitoring, this hot-pluggable module seamlessly integrates into any SFP+-enabled switch, instantly converting it into an ONT for XGSPON networks. Advanced web management enables effortless configuration, diagnostics, and scalability.
• Ideal for carriers and enterprises, the stick ensures carrier-grade reliability and cost-efficiency for next-gen FTTx deployments.
• Applications: Residential home gateway，Network switch/router, VDSL MDU, and G.fast DPU，Mobile backhaul
• Complies with ITU-T G.987.2,Complies with ITU-T G.9807.1, G.9807.2 ,Complies ITU-T G.988 OMCI L2 MAC Bridge (Up to 64 L2 bridges),G.8275/Y.1369/IEEE 1588v2
• Firmware Compatibility: Supports 8311 community firmware.Streamlined device configuration with ​one-click web setup! Access the interface at ​192.168.11.1 using username root (no password required).